Stranger Issues – Steve Harrington Season 2 Torso & Nail Bat Cookie Cutter & Stamp Set – 2 Designs

Cookie cutter and stamp set impressed by Steve Harrington’s Season 2 look from the Stranger Issues sequence, together with his traditional torso design with sun shades and the legendary spiked baseball bat.

👉 You will get the complete Steve Harrington Cookie Cutter & Stamp Set – Model 2 (5 Designs, totally different outfits from the sequence) on the following hyperlink:
https://cults3d.com/es/modelo-3d/casa/stranger-things-steve-harrington-cookie-cutter-stamp-set-v2-5-designs

👉 You will get Steve Harrington Cookie Cutter & Stamp Set – Model 1 (3 Designs) on the following hyperlink:
https://cults3d.com/es/modelo-3d/casa/stranger-things-steve-harrington-cookie-cutter-stamp-set-3-designs

👉 You will get the complete Steve & Dustin duo set on the following hyperlink:
https://cults3d.com/es/modelo-3d/casa/stranger-things-steve-dustin-duo-cookie-cutter-stamp-set-3-designs

👉 You can too discover the complete assortment of Stranger Issues cookie cutters on the following hyperlink:
https://cults3d.com/es/colecciones-de-disepercentC3percentB1os/Handy3d/stranger-things-cookie-cutters

⚠️ It is a digital file solely – resale of the STL will not be allowed.

Print the cutter with a 0.4 mm nozzle.

The stamp might be printed with a 0.4 mm or 0.5 mm nozzle at a low velocity (35–40 mm/s).
Layer peak doesn’t considerably have an effect on the print high quality.

I like to recommend correctly adjusting retraction settings to attenuate stringing.

If stringing happens, you may fastidiously take away it with a lighter after printing.

Don’t scale the recordsdata to keep up the optimum line width for 3D printing.