LEAP 71 has efficiently hot-fire-tested two completely different 20 kN methalox rocket engines designed with its Noyron Massive Computational Engineering Mannequin.
The corporate’s typical bell nozzle engine and full-scale aerospike engine each went from specification to first flame in underneath three weeks. LEAP 71 has confirmed they have been additionally solely 3D printed from a high-temperature copper alloy (CuCrZr) by Aconity3D.
Every engine is claimed to generate 2 tons of thrust (4,500 lbf) burning cryogenic methane and liquid oxygen (methalox), making them appropriate for orbital-launcher functions.
Whereas ‘radically completely different’ in form and inner geometry, each engines have been generated by the identical Noyron mannequin, counting on the identical physics and logic. The aerospike — with its toroidal combustion chamber and central spike — guarantees greater effectivity, wider operational usability, and higher deep-throttle efficiency than typical engines. An aerospike has by no means efficiently been flown into house, however LEAP 71 has now carried out a profitable sizzling fireplace take a look at of 1 twice – the primary coming in December 2024.
Throughout this second take a look at, the aerospike may solely be operated for a single burn due to points encountered throughout startup transients; nevertheless, it reached full chamber stress at 50 bar and validated the basics of the design. In the meantime, the traditional bell-nozzle thruster reached regular state at nominal chamber stress and thrust, validating the underlying physics fashions and working above 93% combustion effectivity. The recent-fire offered vital suggestions about real-life pressures and temperatures, all of which fell throughout the anticipated ranges.
The recent-fire offered vital suggestions about real-life pressures and temperatures, all of which fell throughout the anticipated ranges. To enhance startup and shutdown transients, particularly for the aerospike, LEAP 71 will now combine a sophisticated ignition system, which was additionally efficiently examined through the week-long testing marketing campaign.
LEAP 71 says the take a look at marketing campaign gives the newest validation of Noyron, which generates advanced equipment straight from specification to production-ready design. It encodes first-principles physics, engineering logic, manufacturing constraints, and sensible concerns right into a coherent system that outputs on to the fabrication course of.
Unique: Behind the scenes at world first sizzling fireplace take a look at of computationally engineered rocket engine
“Noyron is our ongoing try to comprehensively encode the method of engineering right into a computational mannequin that may function independently of people — radically compressing iteration occasions and making objects attainable that have been beforehand unfeasible. These bodily assessments — actually hot-firing the engines — generate essential information that may solely be obtained in the actual world,” stated Lin Kayser, co-founder of LEAP 71.
Area propulsion is certainly one of LEAP 71’s key focus areas, with the corporate firing a Noyron-generated engine on common each 4 weeks over the previous 18 months.
“Methane is a fancy propellant to mannequin,” stated Josefine Lissner, CEO of LEAP 71 and Principal Architect of Noyron. “Opposite to the kerosene gas we examined prior to now, it undergoes important density adjustments underneath completely different temperatures and pressures. So, Noyron’s predictions have to be spot on with a view to produce working {hardware}. Additionally, the elevated measurement of the engines comes with its personal operational challenges.
“Within the final 12 months we examined kerolox engines from 1.5 to 7.5 kN, utilizing completely different supplies and configurations. Noyron now delivers first-time-right rocket thrusters for kerosene and cryogenic liquid oxygen. We’re assured that we’re near reaching the identical for cryogenic methane. This take a look at was an vital step for us, validating that we are able to radically scale back the time for our prospects to get to the launch pad with Noyron-generated engines.”
The newly examined 20 kN methalox engines characterize roughly 10% of the thrust class LEAP 71 goals to hot-fire in 2026. Manufacturing validation of the 200 kN — and even bigger 2,000 kN — methalox engine designs is already underway, making use of the biggest metallic 3D printing techniques on this planet.
